Bunn Titan Single 40885.0000E User Manual Page 1

TITAN SINGLE™INSTALLATION & OPERATING GUIDEBUNN-O-MATIC CORPORATION POST OFFICE BOX 3227SPRINGFIELD, ILLINOIS 62708-3227PHONE: (217) 529-6601 F

Page 2BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTYBunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:1) Airpots, thermal carafes

Page 340885 112611USER NOTICESCarefully read and follow all notices in this manual and on the equipment. All labels on the equipment should be kept in

Page 440885 080108ELECTRICAL REQUIREMENTSWARNING - If the power cord is ever damaged, it must be replaced by the manufacturer or its service agent wit

Page 5PLUMBING REQUIREMENTSThis brewer must be connected to a cold water system with operating pressure between 20 and 90 psi (138 and 620 kPa) with a

Page 6ENABLEON / OFFBREWSMALLLARGEBREWA. MAIN ON/OFF SWITCH This switch, located under the brewer in front of the right rear leg, turns power on and

Page 7INITIAL SET-UPVIEWING ASSET & SERIAL NUMBER1. To view the asset number of the machine, press and hold the left hidden switch until the disp

Page 8COFFEE BREWING1. Begin each brew cycle with a clean empty brew funnel.2. Insert a BUNN filter into the funnel. NOTE: The funnels are equipped w

Page 9CLEANING1. The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all surfaces on Bunn-O-Matic e