Bunn JDF-2N User Manual download pdf (Page 8)

OPERATING CONTROLS (cont.)

FIG 5 Press and Hold Models

A. Product Dispense Switch

Pressing and holding switch will initiate product ﬂow from the respective nozzle; releasing the switch will

stop the ﬂow.

B. Hidden Switch

These switches are used to access, change and exit the dispenser program mode.

C. Lock Switch

This switch is used to lockout the dispensing capabilities.

FIG 6 Portion Control Models

B. Hidden Switch

These switches are used to access, change and exit the dispenser program mode.

C. Lock Switch

This switch is used to lockout the dispensing capabilities.

D. Product Dispense Switch

Momentarily pressing and releasing one of the switches will initiate a timed dispense. Each station has three

different timed dispenses which are preset at the factory. Refer to DISPENSER USE section for preset volumes

and adjustment procedures.

E. Plus/Stop Switch

This switch can be used to “top-off” a beverage. Pressing and holding switch will initiate product ﬂow from

the respective nozzle; releasing the switch will stop the ﬂow. Momentarily pressing this switch during a timed

dispense will stop the ﬂow.

38310 062205

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

No comments

Bunn JDF-2N User Manual Page 8