Bunn SINGLE GPR DBC-DV User Manual download pdf (Page 6)

Page 6

ON / OFF

OPERATING CONTROLS

(a) MAIN ON/OFF SWITCH

This switch, located under the brewer behind the right front leg, turns power on and off to all components

in the brewer.

(b) BATCH SELECTOR SWITCHES

Pressing the switch corresponding to the Small, Medium, or Large batch selects the amount of coffee to

be brewed. Pressing a different switch after a brew cycle has been initiated does not change the brew batch in

progress. Light indicates the selected batch to brew.

Pressing the ENABLE BREW switch alternately turns the brewing side on and off. Pressing this switch during

the brew cycle will interrupt the brew cycle, stopping the ﬂow of water. Pressing this switch during the program-

ming of the brewer will exit the setup and return to the main screen.

(d) BREW SWITCH

Momentarily pressing and releasing this switch begins a brew cycle.

(e) PROGRAM SWITCH

Pressing and holding the upper right hidden switch allows entry to the programming menus. Pressing and

releasing the switch steps through each function screen during programming.

(f) FUNCTION SCREEN

This is the display which shows the various functions of the brewer and allows the programming to be ac-

complished.

(g) FUNCTION SCREEN SWITCHES

These are the hidden switches which are used to program the brewer.

(h) FUNNEL SENSING COILS

These are used to "receive" information from the Smart Funnel handle (coffee name and batch size), and also

from RECIPE CARDS.

(j) SCROLL BACKWARDS

The upper left hidden switch can be used to scroll backwards through the function list.

P3438.25

MAIN ON/OFF

SWITCH

P3898

37994 050508

1 2 3 4 5 6 7

No comments

Bunn SINGLE GPR DBC-DV User Manual Page 6