Bunn T3 Service Manual download pdf (Page 19)

Page 19

SERVICE (cont.)

TANK HEATER SWITCH (cont.)

FIG. 19-1 TANK HEATER SWITCH TERMINALS

15. Set tank assembly inside the hood on mounting

brackets and secure with two #8-32 screws.

16. Reconnect the wires to the limit thermostat, tank

heater and the control thermostat. Refer to limit

thermostat, tank heater and control thermostat sec-

tions in this manual when reconnecting wires.

17. Brewers with faucet reinstall the faucet tube and

reconnect the water supply tube to the coil as-

sembly.

18. Secure the sprayhead tube to the hood using hex

nut.

19. Install sprayhead.

20. Install ﬁ ll basin, inlet gasket and secure to tank lid

with tank inlet ﬁ tting.

21. Carefully install water ﬁ ll tube into the back of

the ﬁ ll basin.

22. Reconnect and turn on the incoming water sup-

ply.

23. Refer to Fig. 15 when reconnecting the wires.

BLK to Limit Thermostat

BLK to Terminal Block

(Black Insert)

41711.1 052009

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 58 59

No comments

Bunn T3 Service Manual Page 19