Bunn Dual SH User Manual download pdf (Page 16)

Page 16

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

29877 080301

SET NEW RECIPE:

If not using a Smart Funnel

(with a sensor coil)

and/or a G92T DBC Grinder, the brewer will function

as a standard Bunn

Dual

Brewer:

It is possible to operate the brewer without using

a Smart Funnel

and/or a G92T DBC Grinder. If a

standard funnel, or if a non-DBC grinder is used the

brewer will automatically select a NO NAME coffee

flavor when the pad is pressed. This means that

no name was read from the funnel's handle.

There are two NO NAME coffee programs that can

be set in the brewer. They are referred to as NO NAME

LEFT and NO NAME RIGHT. The left and right sides of

the brewer can be set up independently of each other.

This includes BREW VOLUMES, BYPASS PERCENT-

AGES, PULSE BREW TIMES, PREINFUSION TIMES

and DRIP-OUT TIMES. The brewer will perform in the

same capacity as a standard Bunn Dual

Brewer.

The instructions for programming the NO NAME

settings are on the following pages. The same steps

are followed for setting the recipe as those that are

used to MODIFY A RECIPE, beginning on page 18.

Note that when the display reads NO NAME LEFT,

that is when MODIFY should be pressed in order to set

the parameters for the NO NAME LEFT coffee.

Otherwise, press NEXT to display NO NAME RIGHT.

At this point, MODIFY should be pressed in order to set

the parameters for the NO NAME RIGHT coffee.

NOTE: Before beginning setup, insert a funnel into the

left and right side funnel rails, and place a Soft Heat

Server beneath each brew funnel.

P2419

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

No comments

Bunn Dual SH User Manual Page 16