Bunn Dual TF DBC User Manual download pdf (Page 22)

Page 22

SET NEW RECIPE:

If not using a Smart Funnel (with a sensor coil) and/or

a G9-2T DBC or MHG Grinder, the brewer will func-

tion as a standard Bunn Dual TF Brewer:

It is possible to operate the brewer without using

a Smart Funnel and/or a G9-2T DBC or MHG Grinder.

If a standard funnel, or if a non-DBC grinder is used

the brewer will automatically select a NO NAME coffee

ﬂ avor when the BREW switch is pressed. This means

that no name was read from the funnel's handle.

There are two NO NAME coffee programs that

can be set in the brewer. They are referred to as NO

NAME LEFT and NO NAME RIGHT. The left and right

sides of the brewer can be set up independently of

each other. This includes BREW VOLUMES, BYPASS

PERCENTAGES, PULSE BREW TIMES and DRIP-OUT

TIMES. The brewer will perform in the same capacity

as a standard Bunn Dual TF Brewer.

The instructions for programming the NO NAME

settings are on the following pages. The same steps

are followed for setting the recipe as those that are

used to MODIFY A RECIPE, beginning on page 21.

Note that when the display reads NO NAME LEFT,

that is when MODIFY should be pressed in order to

set the parameters for the NO NAME LEFT coffee.

Otherwise, press NEXT to display NO NAME

RIGHT.

At this point, MODIFY should be pressed in order to

set the parameters for the NO NAME RIGHT coffee.

NOTE: Before beginning setup, insert a funnel into the

left and right side funnel rails, and place a ThermoFresh

Server beneath each brew funnel.

P2419

35058 121102

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

No comments

Bunn Dual TF DBC User Manual Page 22