Bunn Dual TF DBC User Manual download pdf (Page 33)

Page 33

PROGRAMMING THE BREWER (cont.)

2. Press YES in this screen. The display should read

LEFT ->->-> RIGHT.

3. If the initial programming was done on the left side

of the brewer, press YES. The display will read ARE

YOU SURE?

4. If you are sure that the data should be transferred

from left to right, press YES. The display will then

read TRANSFER COMPLETE, and will automatically

advance to the next function screen.

5. In the LEFT ->->-> RIGHT screen, if the program-

ming was done on the right side and it is desired

to transfer from right to left, press NO. The display

will then read LEFT <-<-<- RIGHT .

6. If the initial programming was done on the right

side of the brewer, press YES. The display will read

ARE YOU SURE?

7. If the data should be transferred from right to left,

press YES. After the data is transferred, the display

will read TRANSFER COMPLETE. This will appear

for 3 seconds, then will exit to the next function

screen. Brew settings for all ﬂ avors are not the

same on both sides of the brewer, only the NO

NAME setting has been transferred.

ENABLE ADS?

This function allows the operator to choose whether

or not to display the advertising message that was en-

tered into the brewer with an AD CARD. This message

will be displayed when the brewer is not in use.

Procedure to Enable/Disable Ads:

1. Press and hold the upper right hidden switch until

the display reads UNITS. Release the switch. Con-

tinue to press and release switch until the display

reads ENABLE ADS. The YES or NO will be ﬂ ashing

to indicate the current selection.

2. Press and release the NO pad to disable this func-

tion (no ads will be displayed on the screen), or;

3. Press and release the YES pad to enable this func-

tion (ads will be displayed on screen).

P2721

ENABLE ADS ?

NO DONE YES

4. When ﬁ nished, press and release DONE to save

the new setting, exit the ENABLE ADS function and

advance to the next function screen, SET TEMP.

Another alternative is to press and release either

of the pads located on the front switch panel to

exit the ENABLE ADS function and return to the

MAIN SCREEN.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Comments to this Manuals

No comments

Bunn Dual TF DBC User Manual Page 33

Comments to this Manuals

Related products and manuals for Coffee machines Bunn Dual TF DBC