Bunn dual sh dbc Specifications download pdf (Page 23)

Page 23

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

Setting Pulse Brew - BY EXAMPLE:

1. This display should read CONTAINER READY?

Place a container under the left side sprayhead.

Place a brew funnel containing a ﬁlter and grounds

on top of the container so that the spray and coffee

bed can be viewed. (See Fig. 1)

2. Choose the batch size to be set by pressing the pad

next to the indicator light on the left brew side. The

batch size indicator selected will be ﬂashing.

3. If everything is in place, press YES in the CON-

TAINER READY? screen. The display should read

PRESS BREW TO START 1ST ON TIME.(a)

4. Press and release the

pad. The brew water

will start to ﬂow into the funnel and the water level

will rise.(b)

5. Watch the ﬂow of water. When it reaches the

desired level in the funnel, press and release the

pad again to end the 1ST ON TIME.(c)

6. The spray will stop and the brew funnel will start

to empty. When the water level in the funnel drains

to the desired level, press again to end the

OFF-TIME. This also begins the spray of water for

the ﬁnal setting.(d)

7. The brew water will begin again and the water level

in the funnel will rise. Watch the ﬂow of water.

When it reaches the desired level, press to

end the LAST ON TIME.(e)

8. The display should now show the 1st, off and last

times for the batch size just programmed. After a

5 second delay, the display will read 3 BATCHES

DONE? (f and g)

9. If other batches need to be modiﬁed, press NO.

The display will go back to SET BY EXAMPLE.

Press YES, then press a different batch size pad

and repeat steps 1 through 8. Repeat until all the

desired batch sizes are set for the left side. (g)

10. When ﬁnished press YES in 3 BATCHES DONE?.

The display will then read SET PREINFUSION.

Another alternative is to press and release either

of the

pads located on the front panel of the

brewer to exit SET PULSE BREW and return to the

MAIN SCREEN.

NOTE: Pressing ® before reaching the ﬁnal setting

screen exits the setup and retains the old values.

P2288

FIG. 1

SET BY EXAMPLE

RETURN TO

SET BY EXAMPLE

SEE MODIFYING

PREINFUSION

5 SEC. DELAY

CONTAINER RDY?

QUIT YES

PRESS BREW TO

SET 1ST ON TIME

PRESS BREW TO

END 1ST ON TIME

PRESS BREW TO

END OFF TIME

PRESS BREW TO

END LAST ON TIME

1ST OFF LAST

X:XX X:XX X:XX

SET PREINFUSION?

NO YES

3 BATCHES DONE?

NO YES

29877 022509

P2410

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 48 49

Comments to this Manuals

No comments

Bunn dual sh dbc Specifications Page 23

Comments to this Manuals

Related products and manuals for Coffee makers Bunn dual sh dbc