Bunn dual sh dbc Specifications download pdf (Page 32)

Page 32

BREW COUNTERS

This function allows the operator to track the

number of brew cycles completed on the left side, the

right side, and the total of both combined. There are

three resettable counters, and one life counter that is

not resettable.

EXIT TO

NEXT FUNCTION

SCREEN

RESETS LEFT

COUNTER

RESETS RIGHT

COUNTER

RESETS BOTH

LEFT AND RIGHT

COUNTERS

LEFT XXXX

NEXT RESET

L + R XXXX

NEXT RESET

L + R XXXX

RIGHT XXXX

NEXT RESET

BREW COUNTERS?

NO YES

Procedures to view/reset the brew counters:

1. Press and hold the ® pad until the display reads

SET NEW RECIPES. Release the ®. Press and

release the ® pad until the display reads BREW

COUNTERS.

2. Pressing NO in this screen will advance to the

next function. Press YES to view the ﬁrst brew

counter (left). This number represents the brew

cycles initiated since that counter was last reset.

3. To advance to the other counters, press and release

NEXT. The four counters are as follows:

LEFT - total brews on the left side (resettable)

RIGHT - total brews on the right side (reset-

table)

LEFT AND RIGHT - total brews on the left and right

sides combined (resettable)

LEFT AND RIGHT - total brews on the left and right

sides combined (non-resettable)

4. To reset any of the counters to zero (except for the

non-resettable counter), press and release RESET

when viewing that particular counter's screen.

P2308

FUNNEL DETECT?

NO DONE YES

Procedure to set funnel detect:

1. Press and hold the ® pad until the display reads

SET NEW RECIPES. Release the ®. Press and

release the ® pad until the display reads FUNNEL

DETECT.

2. NO or YES should be ﬂashing to indicate the cur-

rent setting.

4. Select YES to prevent brewing if a Smart Funnel is

not correctly situated in the rails. If this function

is activated and a brew cycle is attempted with the

funnel not properly situated, the display will read,

FUNNEL NOT IN PLACE, until one is in place.

5. Select NO to allow brewing without a Smart Fun-

nel in place. This is selected when brewing with a

funnel other than a Smart Funnel (a regular brew

funnel).

6. When ﬁnished, press and release DONE. This will

retain the changes, exit this function screen and

advance to the next. Another alternative is to press

either of the

pads located on the front switch

panel to exit the FUNNEL DETECT and return to

the MAIN SCREEN.

P2309

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

5. When ﬁnished, press NEXT to advance counter

screens until the display reads BREW COUN-

TERS. Press and release NO to advance to the

next function screen, or press and release either

of the

pads on the front switch panel to exit

the BREW COUNTERS function and return to the

MAIN SCREEN.

FUNNEL DETECT (optional)

This function allows the operator to prevent the

start of a brew cycle if a Smart Funnel is not positioned

correctly in the funnel rails.

29877 022509

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 48 49

Comments to this Manuals

No comments

Bunn dual sh dbc Specifications Page 32

Comments to this Manuals

Related products and manuals for Coffee makers Bunn dual sh dbc