Bunn dual sh dbc Specifications download pdf (Page 20)

Page 20

29877 022509

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

% BYPASS

This function allows adjustment of the amount of

water that bypasses the grounds. The number signi-

ﬁes the percentage of the brew volume which does

not ﬂow over the coffee grounds.

Modifying recipes - bypass percentages:

Range: 0% to 90% for all three batch sizes

NOTE: If the brewer is already in the % BYPASS screen,

it is not necessary to follow steps 1 through 6 in this

section, but proceed directly to step 7.

1. Press and hold the ® pad until the display reads

SET NEW RECIPES. Release the ® pad. Press the

® until the display reads REVIEW RECIPES.

2. Press YES to proceed. The display should now

read NO-NAME LEFT, along with MODIFY, SHOW

and NEXT.

3. Press and release NEXT to advance to the desired

coffee name to be modiﬁed.

REVIEW RECIPES?

NO YES

3 BATCHES DONE?

NO YES

3 BATCHES DONE?

NO YES

SET PULSE BREW?

NO YES

BREW OZ. XX.X

(-) DONE (+)

% BYPASS XX.X

(-) DONE (+)

NO-NAME LEFT

MODIFYSHOWNEXT

(COFFEE NAME)

MODIFYSHOWNEXT

THAT WAS THE

LAST RECIPE

EXIT TO

NEXT FUNCTION

SCREEN

ADVANCES TO ALL OTHER

COFFEE NAMES PROGRAMMED

IN THE BREWER'S MEMORY

WHEN THE LAST COFFEE NAME

IN THE BREWER'S MEMORY IS

DISPLAYED, PRESSING NEXT

WILL EXIT AND THE DISPLAY

WILL THEN READ:

SEE MODIFYING

PULSE BREW ON

THE FOLLOWING PAGE

OR PRESS AND RELEASE

EITHER ON/OFF SWITCH TO

EXIT THE % BYPASS SETUP

AND RETURN TO THE MAIN

SCREEN

P2292

4. Press and release MODIFY. The display should

read BREW OZ.

5. Press and release DONE. The display should read

3 BATCHES DONE?.

6. Press and release YES. The display should now

read % BYPASS, and a batch light will be blinking.

Press and release the batch size to be modiﬁed.

7. Using (-) and (+) set the amount of bypass water

(percentage) to be dispensed around the grounds

for that particular batch size.

8. When ﬁnished, press another batch size and repeat

step #7 for each batch to be modiﬁed.

9. When ﬁnished setting all batch sizes, press DONE.

The display should read 3 BATCHES DONE?

10. If they are not correct, press and release NO to

return to the % BYPASS setup screen.

11. If the 3 batch sizes are correct, press YES. This will

advance to SET PULSE BREW. Another alternative

is to press either of the

pads to exit the %

BYPASS setup and return to the MAIN SCREEN.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 48 49

Comments to this Manuals

No comments

Bunn dual sh dbc Specifications Page 20

Comments to this Manuals

Related products and manuals for Coffee makers Bunn dual sh dbc